infrared microscope
英 [ˌɪnfrəˈred ˈmaɪkrəskəʊp]
美 [ˌɪnfrəˈred ˈmaɪkrəskoʊp]
红外显微镜
双语例句
- Scanned laser infrared microscope
扫描激光红外显微镜 - Methods An infrared navigation system with integrated microscope guidance was used for frameless intracranial neuronavigation in the surgery of32 patients with intracranial angioma.
方法在32例脑内海绵状血管瘤手术中，应用美国枢法莫-丹历公司最新一代外科导航系统进行病灶定位。 - Application of Infrared Television Microscope for Examining Semiconductor Materials and Devices
红外电视显微镜在检测半导体材料及器件方面的应用 - Furthermore, We've characterized them by means of measuring specific surface, Infrared spectrum, X-ray diffraction, Scanning electron microscope and Raman spectrum.
并采用测定比表面、红外光谱、X-射线衍射、扫描电镜和拉曼光谱等技术对催化剂进行了表征。 - Methods The fat-like material was analyzed by X-ray diffraction infrared spectrum and eletronic microscope.
方法将白肉样品进行X-射线分析和红外光谱分析，用透射电镜观察并测定其成分和结构； - Composite paints were characterized by infrared spectrometry ( FT-IR), transmission electron microscope ( TEM), scanning electron microscope ( SEM), and its mechanical properties, alkali-resistant, acid-resistant and heat-resistant abilities were measured.
用红外光谱（FF-IR），透射电镜（TEM）和扫描电镜（SEM）表征了其结构，并测试了其机械性能、耐酸碱以及耐高温能力。 - The copolymer was confirmed by means of Infrared spectroscopy, Microscope and X-ray diffractometer.
利用红外光谱、显微镜和X-射线衍射等手段对产物进行了结构和性能表征。 - Methods: The cardiac muscle cells were divided into 3 groups, and irradiated by HPM for 30s, 60s, and 120s respectively, then the infrared spectrum of each group was measured on the infrared microscope of FTIR instrument.
方法：将培养的心肌细胞分为3组，分别用高功率微波辐照30,60120s，然后在傅里叶变换红外光谱仪的红外显微镜上测定每组细胞的红外光谱。 - The structure was attributed by the means of infrared spectrum, polarizing microscope, transmission electron microscopy, and Differential Scanning calorimetry.
利用傅立叶红外光谱、偏光显微镜、电镜扫描、常温差热分析等手段对IPN凝胶的结构进行了表征。 - The hardware system, consisting of a focal plane array detector, step-scan Fourier transform infrared spectrometer, infrared microscope, and image formation lens, and the information extraction software are described.
介绍了用焦平面阵列检测器、步进扫描傅里叶变换光谱仪、红外显微镜、分束器构成的红外光谱图像硬件系统及信息提取的软件方法； - From the Infrared and Scanning Microscope, the improvement of compatibility was discovered.
红外光谱和扫描电镜照片都证明了粘合剂改善了材料的相容性。 - By means of the methods of DTA-TGA, infrared spectroscope and optical microscope, we made a series of investigations on heat effected surface layer of the friction material which was made from basic trinal formula and had undergone a friction test on the constant speed type friction tester.
本文通过差热-热失重分析、红外光谱分析和光学显微观察等手段，对经过定速式试验机摩擦试验的石棉-树脂-填料三元基础配方材料的热影响表面层进行了研究。 - At last, the structure and the stability of the products are determined by the aid of infrared absorption spectrum and freeze-etching electron microscope.
最后通过红外光谱及冷冻蚀刻电镜观测技术，对产物结构和稳定性进行了测定。 - The film was characterized by Fourier Transform Infrared Spectroscope ( FTIR), Scanning Electron Microscope ( SEM), Atom Forth Microscope ( AFM), X-ray Photoelectronic Spectrum ( XPS), and corona-resistance tests.
制备成的薄膜采用红外光谱，热失重分析，表面扫描电镜，原子力显微镜，光电子能谱，耐电晕试验等对其表面结构和电学性能，热性能等进行了表征。 - In this paper some results from examining infrared detector materials using scanning electron microscope of type DX-3A ( manufactured in China) are reported. Te-rich inclusions in HgCdTe and metal inclusions in PbSnTe have been detected successfully, the smallest dimension of which is ten micrometers.
用国产DX-3A型扫描电子显微镜分析红外探测器材料，可成功地检测线度10μm以下的碲镉汞中的富磅夹杂相和碲锡铅中的金属夹杂相。 - The causes of surface figure errors of infrared microlens fabricated with atomic force microscope anodic oxidation were studied and the methods of reducing surface figure errors were put forward.
分析了原子力显微镜加工红外微透镜产生面型结构误差的原因，并提出了减小面型结构误差的方法。 - Silica aerogel thin films were prepared at ambient pressure by sol gel technique. Fourier transform infrared spectroscope ( FTIR), scan electron microscope ( SEM) and ellipsometer were used to characterize the structure and properties of the films.
采用溶胶&凝胶工艺在常压下制备了SiO2气凝胶薄膜，并用傅里叶红外光谱仪（FTIR）、扫描电子显微镜（SEM）、椭偏光谱仪等表征了薄膜的结构和性能。 - The time-temperature profiles of open or sealed tapioca starch systems with different moisture contents subjected to microwave processing were established and the structures of tapioca starches after irradiations were investigated by the infrared crystalline indices and polarizing microscope.
利用红外结晶指数、偏光显微镜等表征手段，考察不同高含水量的木薯淀粉在敞口和封口条件下，经微波辐射后的热效应及其结晶结构的变化。 - The mechanism of in-situ cyclization is discussed. MAA/ AN and its foam are characterized by infrared adsorption spectrum, polarizing microscope and differential thermal analysis, and the mechanical properties and heat-resistance of MAA/ AN foam are studied.
探讨了原位成环的机理，采用傅立叶红外光谱仪、热台偏光显微镜和差示扫描量热仪对MAA/AN及其泡沫塑料进行了表征，研究了MAA/AN泡沫塑料的力学性能和耐热性能。 - Fabrication of Infrared Microlens Array Using Atomic Force Microscope
原子力显微镜加工红外微透镜阵列的研究 - Surface morphology, chemical structure and dielectric property of the film were measured and characterized by Fourier Transform Infrared Spectroscope ( FTIR), Atomic Force Microscope ( AFM) and dielectric Spectra.
分别用傅立叶变换红外光谱、原子力显微镜及介电谱对薄膜的表面形貌、化学结构和介电性能进行了测试和表征。 - The molecular structure, figure and particle size distribution of the polymers were analyzed by Infrared Spectrometer, Scanning Electron Microscope, Transmission Electron Microscope and Particle Size Distribution Analyzer. The mechanism of the dispersion polymerization was discussed.
用红外光谱仪、扫描电镜、透射电镜和粒径分布仪对产物的结构、微粒形貌和粒径分布进行了分析，探讨了分散聚合的机理。 - Using infrared spectroscopy, X-ray diffraction and electron microscope scanner characterize the various substances.
采用红外光谱仪、X光衍射仪及电镜扫描仪对各物质进行了表征分析。 - By the test of X-ray diffraction, infrared spectroscopy scanning, polarizing microscope, the impacting relationship of ultrasonic field on the crystallization, orientation and degradation of the micro-parts is studied.
通过X射线衍射、红外光谱扫描、偏光显微镜等微观测试分析，研究了超声外场作用对制件成型过程中的分子结晶、取向和降解的影响规律。 - Such as: the circuit board, the infrared microscope can be large scale integrated circuit boards failed in the tens of thousands of tiny components of the image transfer to a computer through the computer analysis, can easily analyze the specific fault lies.
如：在电路板方面，红外显微镜可以将出现故障的大规模集成电路板中数以万计的微小元器件的影像传输到计算机中，经过计算机的分析，可以很容易地分析出具体故障所在。 - The infrared microscope infrared imaging technology through the use of temperature can identify the problem.
而红外显微镜利用红外成像技术通过温度的变化就可以找出问题所在。 - Struture and morphology of hybride films are characterized by Fourier transform infrared apparatus and atomic force microscope. Thermal stability, transmittance of UV-Vis, mechanical properties and corona-resistance of polyimide hybrid films are tested.
采用红外光谱仪、原子力显微镜表征了杂化薄膜的结构和形貌，测试了杂化薄膜的热稳定性、紫外-可见光透过率、力学性能和耐电晕性。 - At the same time, we test the synthetic crystals with infrared spectra, high power microscope, Raman spectroscopy etc. to determine the structure of crystal growth, and growth characteristics of the samples; eventually we find the best deposition parameters.
同时对合成晶体进行红外光谱，高倍镜观察、拉曼光谱等测试，确定生长晶体的结构，并分析样品的生长特征，最终找出了最佳的沉积参数。